The technological process of production of glued beams in the LesCo company begins with sawing of logs on the automated saw frame of the Italian and Slovenian production which provides high quality of sawing.

Drying of lumber takes place in automated Italian drying chambers up to 10-12% of humidity, which eliminates the possibility of further rejection and prevents wood rot.

After the drying chambers, the sawn timber enters the shop, where it is calibrated on a double-sided machine to equalize the thickness of the boards, as well as for clearer detection of defects and knots of wood, which will be cut in the optimization process on a special machine for longitudinal splicing.

Splicing of lumber is carried out on Italian equipment. This splicing line allows us to get boards of the necessary length. The workpieces are calibrated on a four-sided machine to obtain the required dimensions of thickness and width.

Planed lumber enters the area of gluing the beam. The use of glue from the world-famous manufacturer AKZO NOBEL guarantees absolute safety and environmental friendliness of materials. After gluing, the process of pressing the beam takes place on the most powerful presses of German and Italian manufacturers.

After technological endurance the glued preparations of a bar are profiled on the four-sided longitudinal milling machine for receiving the corresponding cross section. This machine of the Italian production can profile beams with section to 300х600 mm.